DataCard LM200 Uživatelská příručka stáhnout pdf (Strana 68)

58 Printer and Laminator Settings

Contrast

DisplaystheLCDcontrastusingsevengradationsfrom

‐3(lowcontrast)to+3(highcontrast).Thedefault

settingis0.

Buzzer OnorOff Displayswhethertheelectronicbeepsoundisonor

off.Thebuzzersoundstoindicateanerror,whenfewer

than20cardsremaininthecardhopper,orwhena

menuselectionismade.

UnitNo Selectfrom1to10 Assigntheunitnumberwhenmorethanoneprinteris

connectedto

aPC.EachprinterattachedtoaPCmust

haveauniquenumber.

Afterchoosingtheunitnumber,presstheEnterkey

andthentheExitkey .Please,poweroffisdisplayedon

theLCDpanel.Powertheprinteroffandthenbackon.

Option:

MG None

Lo‐Co

Hi‐Co

DisplaysthecoercivityforwritingdatatoISOmagnetic

stripecards(ifamagneticstripeoptionisinstalled):

 None:Nomagneticstripe

 Lo‐Co:238x10

[A/m](300[Oe])

 Hi‐Co:218x10

[A/m](2750[Oe])

ICAntenna None

Installed

Displayswhetherthecontactlesscardoptionis

installed:

 Nonefornoantenna.

 Installedwhenasmartcardantennaisused.

ICContact None

ISOType

Displayswhetherthecontactcardoptionisinstalled:

 Nonefornocontact.

 ISOtypeifacontactcardoptionisinstalled.

ContactICR/W None

Installed

DisplayswhetherthecontactcardR/Woptionis

installed:

 Nonefornocontact.

 Installedwhenaninternalcontactsforexternal

readeroptionisinstalled.

BendRemedy

None

Installed

Displayswhetherthebendremedyoptionisinstalled.

MenuDisplay Settings Function

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 137 138

Komentáře k této Příručce

Žádné komentáře

DataCard LM200 Uživatelská příručka Strana 68

Komentáře k této Příručce

Související produkty a manuály pro Laminátory DataCard LM200