DataCard UltraGrafix Select Instalační manuál stáhnout pdf (Strana 160)

148 Production Options Setup

Allow Double Topping - With this option selected, the card is topped twice (if

needed) by the same Topping Module. The card is moved into the first topping

position (60%) and the card is topped on the first 60% of the card. Then the card is

advanced to the second topping position (100%) and topped on the rest of the

card. Double topping is used when the length of the embossing is greater than the

ISO standard.

Use Upstream Artista MCB For Full Buffering - By default this option is checked

when creating a new production options setup.

Artista Downstream MCB Rele

ase Threshold - This sets the release threshold

for the downstream Multi-Card Buffer module so the adjustment can fit the

application. The default is 0, but this threshold can be set to between 0 and 20

cards. Controlling this setting allows cards to start flowing into the Artista VHD

before the MCB is ready to receive them.

• Too high a value will increase the number of times the Artista VHD

empties

• Too high a value could result in wasted ribbon and RTM.

Station Groups Tab

This tab allows you to define Input and Output Station groups to manage

multiple card stocks. Enter the parameters as needed.

Groups are

sets of trays to manage multiple Input and Output Stations. For

example, if the system has 4 input hoppers and the production requires two

different card types then inputs 1 and 2 can be ganged together for one card

type, and 3 and 4 ganged together for the other card type.

1. Select the number of Input/Output Station Groups from the lists. The

interface adjusts accordingly.

2. Se

lect the number of stations per group from the list.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 321 322

Žádné komentáře

DataCard UltraGrafix Select Instalační manuál Strana 160