DataCard RL90 Uživatelská příručka stáhnout pdf (Strana 43)

Cleaning the laminator

RP90 and RL90 User Guide 37

Cleaning the laminator cartridge

The laminator cartridge can collect debris and dust during lamination and

supply loading. Clean the cartridge every 1,000 cards.

1 Open the laminator door by pulling the top of the door toward you.

2 Press the laminator cartridge eject button to remove the laminator

cartridge.

3 Remove the supply and take-up spools if present.

4 Clean the two cartridge guide shafts and the four metal guides with a

lint free cloth and ethanol.

5 Clean the laminator’s guide rails and the cartridge opening.

6 Replace the supply and take-up spools on the cartridge. See “Load

laminate” on page 11

7 Replace the loaded laminator cartridge in the laminator until it clicks

into position.

8 Close the laminator door.

Laminator fan filter

The laminator fan filter is designed to

keep airborne particles from entering the

unit. Clean the filter regularly and replace

it when the foam begins to deteriate.

1 Remove the filter from the back of

the laminator by pulling the filter

cover off.

2 Clean the filter carefully using a

vacuum cleaner. Hold the foam

filter in place to prevent it from

being drawn into the vacuum.

3 Reinstall the filter.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 74 75

Žádné komentáře

DataCard RL90 Uživatelská příručka Strana 43