DataCard RL90 Uživatelská příručka stáhnout pdf (Strana 23)

Prepare to print cards

RP90 and RL90 User Guide 17

Set the retransfer film type

1 Press the MENU key until

"Retransfer" is displayed.

2 Press the ENTER key.

3 "Media Type" is displayed.

4 Use the up and down arrow

keys to select Std (1000/roll).

Selections of 250 and 750 are

not available at this time.

5 Press the ENTER key.

6 Press EXIT twice to return to

the "Ready" display.

Initialize the retransfer film

1 Press the RESET key on the

control panel.

2 The LCD display reads

"Initialize OK?"

3 Use the up and down arrow

keys to select "2'nd Panel,

OK?" or "Next Panel, OK?"

— Press the ENTER key

when "Initialize, OK?" is

displayed to initialize the

printer without winding the

film.

— Press the ENTER key

when "2'nd panel, OK?" is

displayed and the printer

winds the retransfer film

two panels.

— Press the ENTER key

when "Next Panel, OK?" is

displayed and the printer

winds the film one panel.

Initialize the patch or topcoat material (optional RL90 laminator only)

You must initialize the laminate

material each time it is changed. To

initialize laminate, press RESET/

and then the ENTER key on the

laminator's LCD panel.

Tips – Retransfer film

• To avoid dirt and dust

particles that may have

adhered to the film during

loading, initialize the

retransfer film one or two

panels each time the film

cartridge is removed from

the printer.

Tips – Retransfer film

• Reset the retransfer film

type each time you change

the type of retransfer film

you are using.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 74 75

Komentáře k této Příručce

Žádné komentáře

DataCard RL90 Uživatelská příručka Strana 23

Komentáře k této Příručce

Související produkty a manuály pro Multifunkční zařízení DataCard RL90